Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
84
Parameter static.features.hide_zero_touch_url.enable <y0000000000xx>.cfg
Description It enables or disables the phone to hide the provisioning URL item on the Zero Touch screen.
Permitted
Values
0-Disabled
1-Enabled
Default 0
PnP Provision Configuration
The following table lists the parameter you can use to configure PnP provision.
Parameter static.auto_provision.pnp_enable <y0000000000xx>.cfg
Description It triggers the Plug and Play (PnP) feature to on or off.
Permitted
Values
0-Off
1-On, the IP phone will broadcast PnP SUBSCRIBE messages to obtain a provisioning server address dur-
ing startup.
Default 1
Web UI Settings->Auto Provision->PNP Active
DHCP Provision Configuration
You can select to use IPv4 or IPv6 custom DHCP option according to your network environment. The IPv4 or IPv6 cus-
tom DHCP option must be in accordance with the one defined in the DHCP server.
The following table lists the parameters you can use to configure DHCP provision.
Parameter static.auto_provision.dhcp_option.enable <y0000000000xx>.cfg
Description It triggers the DHCP Active feature to on or off.
Permitted
Values
0-Off
1-On, the IP phone will obtain the provisioning server address by detecting DHCP options.
Default 1
Web UI Settings->Auto Provision->DHCP Active
Parameter static.auto_provision.dhcp_option.list_user_options <y0000000000xx>.cfg
Description
It configures the IPv4 custom DHCP option for requesting provisioning server address.
Multiple options are separated by commas.
Note: It works only if “static.auto_provision.dhcp_option.enable” is set to 1 (On).
Permitted
Values
Integer from 128 to 254
Default Blank
Web UI Settings->Auto Provision->IPv4 Custom Option
Parameter static.auto_provision.dhcp_option.list_user6_options <y0000000000xx>.cfg
Description
It configures the IPv6 custom DHCP option for requesting provisioning server address.
Multiple options are separated by commas.
To Next Page
Loading...
Need help?
General
