Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
320
means transferring a call with prior consulting.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Transfer->Attended Transfer On Hook
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Transfer Mode for Dsskey Configuration
You can configure the transfer mode for the IP phone when transferring the current call via a specified DSS key. Yealink
IP phones support four transfer modes: New Call, Attended Transfer, Blind Transfer and Optional.
The transfer mode is applicable to the following DSS keys:
l Speed Dial key
l Transfer key with an assigned value
l BLF/BLF List key
It is not applicable to T19(P) E2/CP920 IP phones.
The following table lists the parameter you can use to configure transfer mode for Dsskey.
Parameter transfer.dsskey_deal_type <y0000000000xx>.cfg
Description
It configures the transfer mode for DSS key. When the user presses the DSS Key during a call, the DSS Key
behavior depends on the transfer mode.
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an
assigned value. It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
0-New Call
1-Attended Transfer
2-Blind Transfer
4-Optional, you can choose to transfer the call via New Call, Attended Transfer or Blind Transfer manually
(not applicable to T48G/T46G/T42G/T41P/T29G IP phones)
Default 2
Web UI Features->Transfer->Transfer Mode via Dsskey
Conference
The Yealink IP phones support three-way local conference and multi-way network conference.
Topics
Conference Type Configuration
Local Conference Configuration
Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.
To Next Page
Loading...
Need help?
General
