Yealink T21PE2 User Manual

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
334
Phone Model Format
Single File
Size
Note
T54S/T52S/T48S/T46S/T42S/T41S/T27G .wav <=8MB
2MB of space should be reserved for the
phone
T48G/T46G/T29G .wav <=8MB
2.4MB of space should be reserved for the
phone)
T42G/T41P/T40P/T40G/T23P/T23G/T21(P) E2/T19(P)
E2/CP920
.wav <=100KB
5KB of space should be reserved for the
phone
Note
The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate and 16-bit resolution.
Ringtone Configuration
The following table lists the parameters you can use to configure ringtone.
Parameter phone_setting.ring_type <y0000000000xx>.cfg
Description
It configures a ring tone for the IP phone.
Example:
phone_setting.ring_type = Ring1.wav
Permitted
Values
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav, Silent.wav,
Splash.wav or custom ring tone name (for example, Customring.wav)
Default Ring1.wav
Web UI Settings->Preference->Ring Type
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Sound->Ring Tones->Common
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Sound->Ring Tones->Common
Parameter
account.X.ringtone.ring_type
[1]
<MAC>.cfg
Description
It configures a ring tone.
Example:
account.1.ringtone.ring_type = Ring3.wav
It means configuring Ring3.wav for account1.
account.1.ringtone.ring_type = Common
It means account1 will use the ring tone selected for the IP phone configured by the parameter "phone_
setting.ring_type".
Permitted
Values
Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (for example, Customring.wav)

Yealink T21PE2 Specifications

General

Brand	Yealink
Model	T21PE2
Category	IP Phone
Language	English