1-197
IM 04L51B01-01EN
Configuring the GX/GP and Viewing the Settings
1
1.21.10 SettingtheWebContentSelectionTree(releasenumber3andlater)
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication(Ethernet)
settings > Server settings > Web contents selection
Web application: Config. tab > Communication(Ethernet)settings > Server settings
Web contents selection
Hardware configurator: Communication(Ethernet)settings > Server settings Web
contents selection
Description
You can set whether to show or hide some of the contents shown on the Data tab of the
Web application.
• When Communication of the security function is set to Login, only administrators can use
this feature.
• When the Communication of the security function is set to Off, there are no restrictions on
using this feature.
When the user level is User
Setup Item Selectable Range or Options Default Value
DO Channel Status/COMM status Off, On On
Log Off, On On
System information/Network
information
Off, On On
File Off, On On
DO Channel Status/COMM status
Set this to Off to hide the following contents on the Data tab.
DO channel, Internal switch, Modbus master, Modbus client, WT client, SLMP client
Log
Set this to Off to hide the log on the Data tab.
Systeminformation/Networkinformation
Set this to Off to hide the system information and network information on the Data tab.
File
Set this to Off to hide Memory summary/Save, Report, Manual sample, Save/load on the
Data tab.
When the user level is Monitor
1
Setup Item Selectable Range or Options Default Value
DO Channel Status/COMM status Off, On On
Log Off, On On
System information/Network
information
Off, On On
File Off, On On
1 You can set this when you are using the advanced security function (/AS option).
The settings are the same as those of the User user level except that Save/Load on the
Data tab does not appear even if File is set to On.
1.21ConfiguringtheEthernetCommunicationFunction
To Next Page
Loading...
Need help?
General
