3-55
IM 04L51B01-01EN
Using Network Functions (Ethernet interface)
3
3.1.6 Saving and Loading Settings and Saving and Loading Various Files
This section explains how to save and load setting parameters. Note that you cannot display,
save, or load setting parameters on a GX/GP whose advanced security function (/AS) is
enabled.
Saving GX/GP Settings
You can save the GX/GP setting parameters to an SD memory card or to USB flash
memory.
1
On the Data tab, click Save load.
The save/load screen appears. The folders
1
and les on the SD memory card are displayed.
1 Folders that have single quotation marks or semicolons in the their names are not displayed.
2
Select SD or USB from the Folder list. The folders and files on the selected folder are
displayed.
level folder button
Click a column title to sort the items in ascending or descending order of that column.
3
Select the save destination folder.
Double-click a folder to show the folders and files in that folder. Click the “move to the
higher level folder” button to move to the higher level folder.
4
Enter the file name in the File Name text box. You do not have to enter the extension.
You can also click a file in the list to display the file name in the File Name text box.
5
Click Save.
The Saveascongurationle dialog box appears.
6
Enter a command, and click Save.
To not save, click Cancel.
The setting parameters are saved, and the Saveascongurationle dialog box closes.
3.1 Using the Web Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)
To Next Page
Loading...
Need help?
General
