5-34
IM 04L51B01-01EN
Status Messages
Code Message
801 Execution completed.
802 Please wait a moment...
803 Saving data to media.
804 Loading file from media.
805 Memory save to media stopped.
806 Data save completed.
807 Sorting files now.
808 Formatting...
809 Post process in progress.
810 Now loading historical data.
811 No unsaved data.
812 Media mounted.
813 Safe to remove media.
814 Media removed improperly.
815 Failed to mount the media.
816 USB device connected.
817 Failed to recognize the USB device.
818 Press [MENU] key to login.
819 Wrong format media.
821 Ethernet cable connected.
822 Ethernet cable disconnected.
823 Connecting to the line...
824 Sending data file.
825 Executing FTP test.
826 Executing e-mail test.
827 Now connecting to SNTP server...
828 Querying to DHCP.
830 Received ressponse from DHCP.
831 IP address set.
832 No hostname registration to DNS server in current settings.
833 Registered hostname to DNS server.
834 Deleted hostname in DNS server.
836 KDC test connection succeeded.
837 Login may be impossible in incorrect KDC client settings.
841 Now adjusting the time.
850 Saving Settings.
851 Attached a module.
852 Updating I/O module firmware.
853 System reconstruction in progress.
854 Executing A/D calibration.
855 Initialization in progress.
856 Writing the A/D calibration value.
857 Resetting the A/D calibration value.
858 Detected new modules. Required System Reconfiguration.
860 Please set as recording channel.
861 Noise may influence measurement in fast mode.
862 Please acknowledge all active alarms before stopping this record.
863 Changed the recording interval.
864 Setting changes exceeded 50. Not possible to save beyond 100. Please save now.
865 "Relay Action on ACK" setting of all DO channel will change to "reset".
866 Not available for electric signature. Please set the certificate.
867 Not available for encrypted comm. Please set the certificate.
865 “Relay Action on ACK” setting of all DO channel will change to “reset”.
868 Chattering filter may not function. Please update module to R1.04.01 or later.
869 Before saving these settings, register users in the User settings menu under Security settings.
875 Failed to display some components.
876 Currently in operation.
877 Time event setting has changed.
878 Input time event time less than segment time.
880 Reconfigure pattern data related to control loops (Starting target setpoint, wait settings, and segment settings)
881 Initialized measured data and settings.
882 Initialized measured data.
891 Changed the language. Please reboot the system.
892 Please reboot the system.
5.2 Troubleshooting
To Next Page
Loading...
Need help?
General
