YOKOGAWA GX20 User Manual

2-21
IM 04L51B01-01EN
Operating the GX/GP
1
2
3
4
5
App
Index
2.2.3 DisplayingtheStatusesofAllChannelsonOneScreen(Overview
Display)
This section explains how to use the overview display.
Procedure
DisplayingtheOverview
1 Press MENU.
The menu screen appears.
2 Tap the Browse tab and then Overview.
The overview is displayed.
All channel overview display
Measured value and unit
Channel number, tag, or tag No.
Channels on which alarms are
occurring are displayed in red.
For details on alarm status, see “section , “Overview Monitor” in section 3.1.4,
“Monitoring the GX/GP Data and Controlling the GX/GP from the Monitor Screen.”
Operation complete
Note
If the number of used channels (the total of IO channels, math channels, and communication
channels) exceeds the maximum number of the overview display (30 for the GX10/GP10 and 100
for the GX20/GP20), all channel display is not possible.
DisplayingtheChannelOverviewandGroupOverview
1 Press MENU.
The menu screen appears.
2 Tap the Context tab and then Display Grouping/All channel.
Either the overview at the channel level or the overview at the group level is displayed.
Each time you tap Display Grouping/All channel, the setting toggles between displaying
at the channel level and group level.
Switch between groups and all channels
2.2 Configuration of Measured Data Display

YOKOGAWA GX20 Specifications

General

Brand	YOKOGAWA
Model	GX20
Category	Recording Equipment
Language	English