YOKOGAWA GX20 User Manual

1-80
IM 04L51B01-01EN
1.6.2 Setting the Display
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu DO channel settings >
Display settings
Web application: Config. tab > DO channel settings > Channel range (display example:
0701-0706) > Display settings
Hardware configurator: DO channel settings > Channel range (display example: 0701-
0706) > Display settings
Description
Setup Item Selectable Range or Options Default Value
First-CH DO channel —
Last-CH DO channel —
First-CH, Last-CH
Select the target channels. The channels that you can specify appear depending on the
module configuration.
Tag
Setup Item Selectable Range or Options Default Value
Characters
Character string (up to 32 characters,
A
a
#
1
)
—
No.
Character string (up to 16 characters,
A
a
#
1
)
—
Characters
Set the tag.
Not all characters may be displayed due to space constraints.
No.
Set the tag number.
Color
Setup Item Selectable Range or Options Default Value
Color 24 colors (red, green, blue, blue violet, brown,
orange, yellow-green, light blue, violet, gray,
lime, cyan, dark blue, yellow, light gray, purple,
black, pink, light brown, light green, dark gray,
olive, dark cyan, and spring green) and a user-
defined color (1 color)
—
Color
Set channel display colors. The colors apply to the trend display and bar graph display.
For instructions on how to set the user-defined color, see page 1-40 in section 1.2.3, “Setting
the Display”.
Zone
Setup Item Selectable Range or Options Default Value
Lower 0 to 95% 0
Upper 5 to 100% 100
LowerandUpper
Set these values when you want to divide the waveform displays of channels into
separate zones so that waveforms do not overlap. Set the Lower and Upper positions as
percentages of the maximum display width. Set Lower to a value less than Upper, and set
the zone width (Upper – Lower) to be 5% or greater.
1.6ConfiguringDOChannels(Digitaloutputchannels)

YOKOGAWA GX20 Specifications

General

Brand	YOKOGAWA
Model	GX20
Category	Recording Equipment
Language	English