3-42
IM 04L51B01-01EN
3.1.5 Changing Settings
Follow the procedure below to change the GX/GP settings. Note that you cannot change the
settings of a GX/GP whose advanced security function (/AS) is enabled (the Config tab will
not appear). The procedure below is for a GX/GP whose advanced security function (/AS) is
not in use.
Note
The items and selectable values that appear in the setup screen vary depending on the hardware
system configuration. If the items that you want to configure do not appear, check the option and
module configuration on the system information monitor.
Notes on Changing Settings
When Settings Can Be Changed
• You can change settings only when the GX/GP is in a condition that allows setting
changes.
• If you are logged in using an account that prohibits setting changes, you will not be able
to change the settings.
Limitations on Modifying Settings
• When not using the login function
There are no limitations on modifying settings.
• When using the login function
If you are connected to the GX/GP with an Admin account, there are no limitations on
modifying settings.
If you are connected to the GX/GP with a User account, you cannot specify the security
settings (Security settings will not appear in the Config tab).
LimitationsonChangingtheLoginPassword
If you click the Config tab > Security settings > User settings, you will not be able to set the
user login password. You can only initialize the password. The default password is “default.”
To change the user password, log in using the user’s account, click Password change on the
Option tab, and change it.
Applying Setting Changes
On each setup screen, send the changed settings to the GX/GP to apply them.
Note
When settings are changed, the message “Restart is required to reflect this changes. Continue?”
may appear. Click OK, and the GX/GP will automatically restart.
3.1 Using the Web Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)
To Next Page
Loading...
Need help?
General
