YOKOGAWA GX20 User Manual

1-250
IM 04L51B01-01EN
Other
Set this to On to initialize settings other than the security settings or control settings.
Communication(IPaddress)
Set this to On to initialize the IP address, DHCP, and DNS settings.
Communication(Serversettings)
Set this to On when you want to initialize the server list settings, server encryption settings,
and channel conversion setting of DARWIN compatible communication.
Calibration correction settings
Set this to On to initialize calibration correction settings and calibration reminder settings (/
AH option).
Instruments tags, etc.
Set this to On to initialize instrument tag settings.
Setup Item Selectable Range or Options Default Value
Internal Data Off, On Off
Internal data
Set this to On to initialize all data in the internal memory.
Procedure
Initializing All Settings
1 Press MENU.
The menu screen appears.
2 Tap the Browse tab and then Initialize Calibration.
The menu screen appears.
3 Tap Initialize > Settings/Internal data > Initialize all > On.
4 Tap Execute.
A conrmation screen is displayed.
5 Tap OK.
The settings are initialized.
Operation complete
Note
• Before initializing, back up necessary setup parameters and other data.
Refer to page 1-238 in section 1.26.1, “Saving the Setting Parameters”
• Initialization does not initialize the A/D calibration password.
If you forget the password, you will not be able to perform A/D calibration. Make sure you do not
forget the password.
• When execute initialization, the message “Restart is required to reflect this changes. Continue?”
may appear. Tap OK, and the GX/GP will automatically restart with the specified language.
1.29InitializingandCalibratingtheSystem(Initialization,reconfiguration,touchscreencalibration),SettingtheMeasurementMode

YOKOGAWA GX20 Specifications

General

Brand	YOKOGAWA
Model	GX20
Category	Recording Equipment
Language	English