1-67
IM 04L51B01-01EN
Configuring the GX/GP and Viewing the Settings
1
Color
Setup Item Selectable Range or Options Default Value
Color 24 colors (red, green, blue, blue violet, brown,
orange, yellow-green, light blue, violet, gray,
lime, cyan, dark blue, yellow, light gray, purple,
black, pink, light brown, light green, dark gray,
olive, dark cyan, and spring green) and a user-
defined color (1 color)
—
Color
Set channel display colors. The colors apply to the trend display and bar graph display.
For usage examples, see page 1-40 in section 1.2.3, “Setting the Display”.
Zone
Setup Item Selectable Range or Options Default Value
Lower 0 to 95% 0
Upper 5 to 100% 100
LowerandUpper
Set these values when you want to divide the waveform displays of channels into separate
zones so that waveforms do not overlap. Set the Lower and Upper positions as percentages
of the maximum display width. Set Lower to a value less than Upper, and set the zone width
(Upper – Lower) to be 5% or greater.
Scale
Setup Item Selectable Range or Options Default Value
Position GX20, GP20: Off, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 1
GX10/GP10: Off/1/2/3/4/5/6$3 1 10
Division
1
4, 5, 6, 7, 8, 9, 10, 11, 12, C10 10
1 Appears when the type is set to Pulse.
Position
Set this to set the scale display position of the trend display. Set this to Off to not display
scales.
Division
Set the number of divisions to make with the main scale marks.
C10: The scale is equally divided into 10 sections by main scale marks, and scale values are
indicated at 0, 30, 50, 70, and 100% positions.
For display examples, see page 1-40 in section 1.2.3, “Setting the Display”.
Bar graph
Setup Item Selectable Range or Options Default Value
Base position Lower, Center, Upper Lower
Division
1
4, 5, 6, 7, 8, 9, 10, 11, 12 10
1 Appears when the type is set to Pulse.
Base position
Set the bar graph base position. This setting is applied when you are displaying the current
value on the scale as a bar graph on the bar graph and trend displays.
Division
Set the number of divisions to make with the main scale marks.
For display examples, see page 1-40 in section 1.2.3, “Setting the Display”.
1.4ConfiguringPulseInputChannels(Releasenumber3andlater)