AMX MIO-R4 User Manual

Working With Properties
125
T
PDesign4 Touch Panel Design Software (v2.10 or higher)
Basic Channel Codes: Page Flip
With Channel Port set to 0 - setup port (in the Programming tab of the Properties Control window), the
following Page Flip options are available (as Basic channel codes):
NXP-PLV Reserved Channel Codes (1-7)
The NXP-PLV will define a set of Channel codes (1-7) and Level codes (1-11) on Port 1 that are reserved
for hardware functionality.
These codes are considered reserved for the device and cannot be re-assigned to other pages or buttons in
the panel project.
The following table lists the reserved Channel Codes for the NXP-PLV:
Level Codes
When a button, page or popup page's Level Port is set to 0 - setup port, then various level code options
are made available (click the down arrow next to Level Codes in the Programming tab of the Properties
Control window to view). These level code options are separated into two main categories: Basic and
Advanced, and the options available depend on what type of element is selected (page, popup page or
button). Furthermore, different button types support different channel codes.
By default, the Level Codes item in the Programming tab displays the Basic Codes. To switch the view
to Advanced Codes, click on Advanced Codes at the bottom of the code list window.
NXP-PLV Reserved Level Codes (1-11)
The NXP-PLV will define a set of Channel codes (1-7) and Level codes (1-11) on Port 1 that are reserved
for hardware functionality.
These codes are considered reserved for the device and cannot be re-assigned to other pages or buttons in
the panel project.
• Calibrate: Creates a page flip to the Calibration page.
• Keyboard: Invokes the on-screen keyboard.
• Keypad: Invokes the on-screen numeric keypad.
• Protected Setup: Creates a page flip to the Protected Setup page.
•Setup: Creates a page flip to the Setup page.
•Time/Date: Creates a page flip to the Time and Date Setup page.
• Virtual Keyboard: Invokes the on-screen virtual keyboard.
Port Code Description
1 1 1 Joystick - East Quadrant
1 2 2 Joystick - West Quadrant
1 3 3 Joystick - North Quadrant
1 4 4 Joystick - South Quadrant
1 5 5 Joystick - Twisted Clockwise
1 6 6 Joystick - Twisted Counter-Clockwise
1 7 7 Joystick - External Footswitch Port

AMX MIO-R4 Specifications

General

Flash memory	32 MB
RAM capacity	64 MB
Certification	FCC, IC, CE, IEC 60950, Japan Approval
Maximum range	30 m
Frequency band	2.4 GHz
Languages support	ARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POR, RUS, THA
Number of devices supported	2
Interface	IR Wireless
Input type	Press buttons
Hard buttons	Yes
Product color	Black
Buttons quantity	29
Remote control proper use	-
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Package weight	25 g

Weight and Dimensions

Depth	19 mm
Width	51 mm
Height	240 mm
Weight	20 g