Pset STwrench User Guide
110 (326) 9836 4134 01 Edition 2.9
At the end of the tightening operation, two more beeps inform the operator of the
end of the operation, and if the final result is in the red area, the buzzer signal
stays steadily ON.
Activated together with the third row of LEDs, and remains active until the
torque applied to the wrench is released.
6.7.1.3.1 Torque + Angle Strategy
You can also achieve the Torque + Angle strategy using the Torque (Mon) / Angle (Contr) strategy:
Define the Start Final Angle value as the torque value from which you want to start performing the “+
Angle” of this strategy:
To Next Page
Loading...
Need help?
General
