STwrench User Guide STwrench Settings
9836 4134 01 Edition 2.9 169 (326)
10.2.2 Information
This window provides some general information, battery charge status and radio information (if a radio
module is installed in the wrench):
10.2.3 ToolsNet settings
These settings are required when you have added the IRC-W module to the STwrench to communicate
with ToolsNet. Set the parameters here according to your own network and your own ToolsNet station.
Once all of the parameters have been set, click on Store, enable the ToolsNet connection enabled flag and
click on Store again. See the Working with ToolsNet chapter for more information.
To Next Page
Loading...
Need help?
General
