Atlas Copco STwrench User Manual

System Overview STwrench User Guide
52 (326) 9836 4134 01 Edition 2.9
In case of Over temperature, disconnect the battery from the battery charger, disconnect charger from AC
power, wait few minutes, reconnect the battery charger to AC power and the battery to the charger, and
check to see if the red light has stopped blinking.
In case of Error, try disconnecting and then reconnecting the battery to the battery charger to solve the
problem.
2.4.8 STwrench Cable Box
The STwrench Cable Box allows the interface between the STwrench and Power Focus.
With this kind of connection, the STwrench is powered by Power Focus and the battery is
no longer required.
A Tensor SL Cable is required to connect the STwrench to the Cable Box, and must be
purchased separately.

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English