Atlas Copco STwrench User Manual

STwrench User Guide STwrench Settings
9836 4134 01 Edition 2.9 173 (326)
• The wrench starts working in the Power Focus mode (see the Working with Power Focus
chapter for details).
NOTE: By deactivating the Enable connection IRC flag, the wrench reverts to
the normal working mode.
10.2.4.3 IRC-W
For IRC-W, all the network parameters must be set properly according to your specific network
parameters. See the chapter Working with Power Focus for details.
10.2.4.4 Cable Box
The Cable Box connection between STwrench and Power Focus can be activated directly from the wrench
keyboard (See the chapter Working with Power Focus for details).
However, it is possible to enable/disable the connection from this window:
After enabling (or disabling) the Cable Box connection, click on Store to confirm.
1. Enable
2. Store

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English