Atlas Copco STwrench User Manual

Working with Torque Supervisor STwrench User Guide
242 (326) 9836 4134 01 Edition 2.9
17 Working with Torque Supervisor
Minimum version of Torque Supervisor required: 4.10
When the STwrench is used with Torque Supervisor, the route of tests is created and transferred to the
wrench by Torque Supervisor. The wrench only executes the tests and Torque Supervisor downloads the
test results.
In this application the tests results are expected to be retrieved by Torque Supervisor. However, it is still
possible to review the results and/or traces using ToolsTalk BLM (before transferring them from Torque
Supervisor). In any case, the Pset should not modified with ToolsTalk BLM when the STwrench is used
with Torque Supervisor.
Access Point
Network
IRC-W

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English