Atlas Copco STwrench User Manual

STwrench User Guide System overview
9836 4134 01 Edition 2.9 29 (326)
The STwrench can work in conjunction with Power Focus, via IRC-B, IRC-Z, IRC-W radio
communication, or through the STwrench Cable Box. The RBU must be Production.
In this mode, the management software (ToolsTalk BLM) is optional; the tightening programs are created
and transferred to the wrench via Power Focus.
See the chapter Working with Power Focus for more information.
2.3.4 Wrench connected to ToolsNet
The STwrench can work in conjunction with ToolsNet. In this mode, the management software
(ToolsTalk BLM) is required to program the wrench; the tightening results are transferred to ToolsNet via
IRC-W.
Connected to ToolsNet, the wrench is typically used for tightening operations on the production line.
See the chapter Working with ToolsNet for more information.
The connection to ToolsNet can be also performed by the QATnode T; for instance, this can be used when
it is not possible to use the IRC-W:
IRC-W
Access Point
Network

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English