STwrench User Guide Introduction
9836 4134 01 Edition 2.9 15 (326)
extension is used with the wrench.
Appendix B EAP-TLS Security Type
This appendix shows how to load the certificates
for the EAP-TLS security type for IRC-W
module.
Appendix C STwrench Factory Settings
This appendix shows the factory configuration of
the STwrench settings.
NOTE: This manual explains all the functions available on the STwrench with full options.
Your specific wrench may not include all the features, such as angle reading or some tightening
1.2 Reference Documents
The following is a list of important documents that may be useful to obtain a complete overview of the
product and all its applications:
• STwrench Safety Information (No. 9836 4489): Multi-language safety instructions
• ToolsTalk BLM registration procedure: How to register the software on the Atlas Copco website
• STwrench calibration procedure: Procedure to calibrate the STwrench (only for use by authorized
calibration centers)
• Installation guides for STwrench modules: Detailed installation instructions, delivered with each
module
• BLM Torque Seminar
• ToolsNet User Guide
• Power Focus User Guide
• BLM Torque Supervisor User Guide
• STwrench WEEE manual: Instructions about how to dispose of the product at the end of its life
To Next Page
Loading...
Need help?
General
