STwrench User Guide Pset
9836 4134 01 Edition 2.9 87 (326)
6 Pset
The set of parameters that controls a tightening process or a residual torque test is contained within a so-
called Pset. This section describes how to setup the Pset parameters necessary to perform a tightening.
The STwrench can store up to 200 Pset/Multistage in its memory.
Click on the Pset icon and enter the Pset Number and Name.
Select the tightening strategy
(see the chapter Tightening
Strategies for details)
To Next Page
Loading...
Need help?
General
