Cisco 4400 Series User Manual

5-29
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 5 Configuring Security Solutions
Configuring Local Network Users
Figure 5-13 TACACS+ Administration .csv Page on CiscoSecure ACS
Note You can click Refresh at any time to refresh this page.
Configuring Local Network Users
This section explains how to add local network users to the local user database on the controller. The
local user database stores the credentials (username and password) of all the local network users. These
credentials are then used to authenticate the users. For example, local EAP may use the local user
database as its backend database to retrieve user credentials. Refer to the “Configuring Local EAP”
section on page 5-38 for more information.
Note The controller passes client information to the RADIUS authentication server first. If the client
information does not match a RADIUS database entry, the local user database is polled. Clients located
in this database are granted access to network services if the RADIUS authentication fails or does not
exist.
You can configure local network users through either the GUI or the CLI.

Cisco 4400 Series Specifications

General

Brand	Cisco
Model	4400 Series
Category	Controller
Language	English