Cisco 4400 Series User Manual

6-38
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 6 Configuring WLANsWireless Device Access
Configuring WLANs
Figure 6-15 IPv6 Bridging and IPv4 Web Authentication
Note The Security Policy Completed field in both the controller GUI and CLI shows “No for IPv4
(bridging allowed for IPv6)” until web authentication is completed. You can view this field
from the Clients > Detail page on the GUI or from the show client detail CLI command.
Using the GUI to Configure IPv6 Bridging
Follow these steps to configure a WLAN for IPv6 bridging using the GUI.
Step 1 Click WLANs to open the WLANs page.
Step 2 Click the ID number of the desired WLAN to open the WLANs > Edit page.
Step 3 Click the Advanced tab to open the WLANs > Edit (Advanced tab) page (see Figure 6-16).
WCS
Splash page
Cisco Unified
Unity server
Cisco Unified
CallManager
Voice WLAN
Data WLAN
IPv6 Client - Traffic is bridged
Data WLAN
IPv4 Client - Web authentication
232299
Si
U

Cisco 4400 Series Specifications

General

Brand	Cisco
Model	4400 Series
Category	Controller
Language	English