Cisco CRS-1 - Carrier Routing System Router User Manual

10-3
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Chapter 10 Managing Cisco CRS Historical Reporting
Historical Reporting Configuration
Configuring Database Server Limits
To limit the performance impact of historical reporting on a particular CRS server,
you can configure a maximum number of client/scheduler database connections
per server.
The maximum database connection refers to the maximum simultaneous (at any
time) connections to the historical reporting database from the historical reporting
client and scheduler. You can configure this value to enhance performance.
For example, if your Call Center has 10 licensed historical reporting sessions, you
can set the value in the Maximum DB Connections for Report Client Sessions
field to be 5. By assigning this value, you will not impact the writing of historical
reporting data records. However, when you configure a value of 5 (in this
example), if the historical reporting client or scheduler attempts a 6th connection,
this attempt will fail, as the maximum database server limit is set to be 5.
To do so, complete the following steps:
Procedure
Step 1 From the CRS Administration menu bar, choose Tools > Historical Reporting.
The Historical Reporting configuration web page opens, displaying a list of
Historical Datastore components in your cluster. The following fields are
displayed in the Database Server Configuration area of the Historical Reporting
Configuration web page.
Step 2 Enter a value in the Maximum DB Connections for Report Client Sessions field
next to a Server Name.
Step 3 Click Update.
Field Description
Server Name The host name or IP Address of the database server.
Maximum DB Connections for
Report Clients Sessions
The maximum number of client and scheduler connections that can
access the Historical Reports Database server.
There is a limit of 5 instances of Historical Reporting Client and
Scheduler based on the load that can be run on each server. The
historical report client issues an error if you exceed this limit.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English