Cisco CRS-1 - Carrier Routing System Router User Manual

11-3
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Chapter 11 Reporting on Real-Time CRS Data
Opening Real-time Reporting
Opening Real-time Reporting
Real-time reporting is available from the CRS Administration web interface.
To open real-time reporting, complete the following steps.
Procedure
Step 1 If you are running Real-time Reporting for the first time on this system, log into
CRS Administration as an Administrator.
The system prompts you to download the Java plug-in; follow the prompt
instructions.
Note After you perform the initial download of the Real-Time Reporting Java
plug-in, non-Administrative users can access Real-Time Reporting on
this system.
Step 2 Choose Tools > Real-time Reporting from the CRS Administration menu.
The Application Reporting web page opens in a new window. The real-time
reporting tool requires a Java plug-in. If the plug-ins is not installed on the
machine you are using, the CRS system prompts you to accept the automatic
installation of the plug-in. If you do not accept the installation, you cannot use
Real-Time reporting.
You run real-time reports from the Application Reporting web page.
Note For detailed information about all the options available through the Application
Reporting tool, see “The Application Reporting User Interface” section on
page 11-7.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English