10-4
CAM PULLEY/CRANKSHAFT/ PISTON/CYLINDER HRX217HYA • HRX217HZA
3. CYLINDER REMOVAL/INSTALLATION
REMOVAL
Drain the engine oil (page 3-6).
Remove the following:
– Crankcase cover (page 10-2
)
– Carburetor (page 8-2
)
– Muffler (page 6-2
)
– Rocker arms and push rods (page 10-7
)
REMOVAL:
Insert a screwdriver or equivalent tool into the recesses
[1] as shown, and carefully pry to remove the cylinder
from the crankcase.
24 N•m (18 ft-lb)
8 x 40 mm BOLT (2)
8 x 25 mm BOLT (2)
CYLINDER HEAD
[1]
To Next Page
Loading...
