480
To manage services:
1. From the navigation tree, select System Management> Service Management.
The service management configuration page appears.
2. Configure the service management as described in Table 193.
3. Cli
ck Apply.
Figure 509 Service management
Table 193 Configuration items
Item Descri
tion
FTP
Enable FTP
service.
Specify whether to enable the FTP service.
The FTP service is disabled by default.
ACL.
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service.
Specify whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service.
Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service.
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service.
Specify whether to enable the HTTP service.
The HTTP service is enabled by default.
Port Number.
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure the port is not used by other service.