INVT SV-DA200 Series User Manual

SV-DA200 series AC servo drive Function codes
-142-
10.00V
3000r/min
AO1 output voltage (V)
Speed (r/min)
P3.31=300
P3.31=100
1000r/min
Note:
1. If the actual output speed is more than 3000r/min, AO1 output is 10V. Please select the gain
according to the actual range of the parameter.
2. When P3.30 and P3.32 select other functions, the gain setting is the same.
P3.31
Data size
32bit
Data format
DEC
Modbus address
1662, 1663
CANopen address
0x231F, 0x00
P3.33
Data size
32bit
Data format
DEC
Modbus address
1666, 1667
CANopen address
0x2321, 0x00
P3.34
Offset voltage of analog
output 1
Setting range
Default
Unit
Available mode
-10.000–10.000
0.000
V
P
S
T
P3.35
Offset voltage of analog
output 2
Setting range
Default
Unit
Available mode
-10.000–10.000
0.000
V
P
S
T
This parameter can be used to adjust the AO1 and AO2 to regulate the actual value of analog
output voltage.
Actual value of analog output voltage = Original value of analog output voltage + Offset value of
analog output voltage
P3.34
Data size
32bit
Data format
DEC
Modbus address
1668, 1669
CANopen address
0x2322, 0x00
P3.35
Data size
32bit
Data format
DEC
Modbus address
1670, 1671
CANopen address
0x2323, 0x00
P3.36
1
Analog output monitor
setting
Setting range
Default
Unit
Available mode
0–2
0
-
P
S
T
This parameter is used to set the output mode and voltage range of the analog output.
Setting value
Output mode
[0]
Voltage output with sign(-10V–10V)
1
Absolute voltage output (0V–10V)
2
Voltage output with zero offset (0V–10V, 5V center)
P3.36
1
Data size
16bit
Data format
DEC
Modbus address
1672, 1673
CANopen address
0x2324, 0x00

INVT SV-DA200 Series Specifications

General

Brand	INVT
Model	SV-DA200 Series
Category	Servo Drives
Language	English