3-33
Machine Settings
3
Extended Functions – Printer –
Stamp Setting
It is set whether information, such as printing conditions and a printing date, is output after printing has been
completed.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press to select [MACHINE SETUP].
4
Press the key.
5
Press to select [STAMP SETUP].
6
Press the key.
7
Press to select ON/OFF.
8
Press the key.
• Press the key several times to end the setting.
Output Example
To Next Page
Loading...
Need help?
General