EasyManuals Logo
Home>MIMAKI>Printer>JV5 Series

MIMAKI JV5 Series User Manual

MIMAKI JV5 Series
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #194 background imageLoading...
Page #194 background image
6-6
Cleaning the Wiper and Cap
It is recommended that the wiper and cap be cleaned frequently in order to maintain the high image quality of the
machine and keep the machine itself in good working order.
1
Press the key in LOCAL to select the
printing mode.
2
Select [ST. MAINTENANCE] of the maintenance menu.
(1) Press the key.
(2) Press to select [MAINTENANCE] and press the key.
3
Press the key.
4
Press the key.
• The carriage moves onto the platen.
5
Remove the wiper.
• Pull out the wiper by holding the protrusions at its both ends.
6
Clean the wiper and bracket.
• Wipe off the ink sticking to the wiper and bracket with a clean
stick dipped in cleaning solution for maintenance.
• When SS21 ink is used, the ink easily sticks around the wiper. Clean the wiper and the area around it
about twice a week (it varies, depending on frequency in the use of the machine).
• Replace the wiper with a new one when it is extremely dirty or bent. ( P.6-8)
• When cleaning the wiper, be careful that lint from the clean stick does not get left on the wiper.
Remaining lint may cause image quality to deteriorate.
<LOCAL . 1> [ #01 ]
WIDTH:****mm
ST . MA I NTENANCE
CARR I AGE OUT < e n t >
Protrusion
Wiper
Bracket

Table of Contents

Other manuals for MIMAKI JV5 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MIMAKI JV5 Series and is the answer not in the manual?

MIMAKI JV5 Series Specifications

General IconGeneral
BrandMIMAKI
ModelJV5 Series
CategoryPrinter
LanguageEnglish

Related product manuals