MIMAKI JV5 Series User Manual

Connecting Cables
1-13
1
Before Use
 Removing USB memory
If a USB memory module is inserted in the personal computer to which a CJV30 machine is connected, click
"Stop" in the "Safely Remove Hardware" window by following the instructions given there first and then remove
the module.
Leaving a USB memory module inserted can cause [ERROR 10 COMMAND ERROR].
Copy the data onto the hard disk before outputting it for printing.
Connecting the Power Cable
1
Insert the power cable into an inlet of the machine.
2
Secure a cable band.
• Secure the cable with the cable band attached to this
machine.
3
Insert the power plug into a plug socket.
• Do not use any power cables other than the attached power cable.
• Be sure to connect the power cable to the outlet near this machine, and make sure that the power cable
can be easily removed.
• Connect the power cable to the grounded outlet. Otherwise, it may result in fire or an electric shock.
Inlet
Power cable
Cable band
Power plug
Socket

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English