MIMAKI JV5 Series User Manual

1-8
Carriage
The carriage consists of the printer unit and the cutter unit.
Printer Unit
Cutter Unit
Conjunct unit
*1
In concert with the data sent from a computer or the movement of the main body,
switching is performed between printer unit and cutter unit.
Printer unit
The printer unit is used for
printing.
Cutter unit
The cutter unit is used for
cutting and printing with a
pen.
*1 When switching the conjunct unit to the printer unit with the cutter unit placed on the platen, the movement speed of the first 20cm
becomes slow to avoid injury from the cutter unit.
Height-adjusting lever
A height-adjusting lever is provided to adjust
the height of the Head in 2 stages according to
the thickness of media. ( P.2-15)
ORIGIN mark
Use the ORIGIN mark as a marker for the origin position when using the printer unit
Tool holder
Attach a tool for cutting media
to the tool holder.
Light pointer
The light pointer is used for detecting the register mark.
Cutter
The cutter is used for cutting off media.

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English