MIMAKI JV5 Series User Manual

1-6
Operation Panel
Jog key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them
to select an item from printing
conditions.
key
Use this key to display the function setting menu.
key
Cancels the last input value or returns the setting menu
to the immediate higher level of the hierarchy.
Display
Displays the status of the machine, set
items and errors.
key
Use this key to switch the modes
between print mode (PRINT MODE
lamp is ON) and cut mode (CUT MODE
lamp is ON).
key
Use this key to switch between [LOCAL] and [REMOTE].
key
Registers the last input value as the setting value or goes to
the immediate lower level of the hierarchy.
key
Use this key to check the prints for
errors in print mode and cut mode.
key
Use this key to set the temperatures for
the Pre-heater, Print heater and Post-
heater or check the current
temperature of the platen.
key
Use this key to select a user type in
print mode or to select a tool condition
in cut mode.
key
Use this key to execute head cleaning
when ink clogging occurs in print
mode, or to feed the media in cut
mode.
key
Deletes the data that has been
received.
CONSTANT lamp
Lights up in green when the heater
temperature reaches the set
temperature.
HEAT lamp
Lights up in orange during heating up
of the heater.

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English