2-16
5
Return the carriage to the station position.
For the Adjusting Lever and the Range
Height-adjusting lever Head height Switching area
Thin
2 mm
(The set position before shipping)
Switch by user
Thick 3 mm
• Set the lever to "Thick" when a thicker medium such as tarpaulin or FF is used.
• Set the lever to "Thick" when the medium is prone to gather dust in the head or is often stained with ink
traces.
• When using a medium of 1 mm thickness or below and SS21 ink, be sure to set the head height to
"Thin".
If used with the head height "Thick", the head gap (between the medium and the height of head nozzle
surface) can be too large and ink drops may be splashed, and so the image quality cannot be assured.
To Next Page
Loading...
Need help?
General