MIMAKI JV5 Series User Manual

Setting the Pinch Rollers
3-7
3
Extended Functions – Printer –
8
Press to set the pressure for the middle
pinch rollers.
• Set value: HIGH/MID./LOW/OFF
9
Press to move the cursor to the pinch roller
number setting.
10
Press to set the number of the pinch roller at
the left end of the medium.
• Set value: 2 to 7
11
Press the key.
12
Press the key several times to end the setting.
Advanced Setting for the Middle Pinch Rollers
Advanced setting is available for the middle pinch rollers according to the medium to be used.
1
Perform the operations in Steps 1 to 10 in P.3-6 "Setting for the Pinch Rollers".
2
Press the key.
3
Press to select a pinch roller to set, and
press to set the advanced setting.
4
Press the key.
5
Press the key several times to end the setting.
• Pinch roller pressure set here is reflected to the medium in the following condition:
When print/cut remotely
When detecting the medium next
• If you wish to reflect the set value to the medium currently set, detect the medium again by moving the
clamp lever up and down.
• When printing in the local mode such as the dot position correction or medium correction, perform the
steps from Step 1 and set the pinch roller pressure again.
ENDS :MID. [H_____H]
INNER:
M ID. No.7-1
ENDS :MID. [H_____H]
INNER:MID. No.
7 -1
ENDS : M I D . [ _ _ _H_ _H ]
INNER:MID. No.
4 -1
ENDS :MID. [H_____H]
INNER:MID. No.
7 -1
ENDS : M I D . [ H_ _ _ L _H ]
INNER:MID. No.
7 -1

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English