Rockwell Automation Publication 750-TG100B-EN-P - June 2019 143
Control Bay and Control Pod Components Chapter 7
Install the IP21/IP54 Roof Vent Filter
Install the IP21/IP54 roof vent filter in the reverse order of removal.
IP54/IP21 Roof Vent Fan
Replacement
Replace an IP21/IP54 roof vent fan on a control or input bay with kit catalog
number SK-RM-IBFAN1-F8.
Remove the IP21/IP54 Roof Vent Fan
Follow these steps to remove the IP21/IP54 roof vent fan.
1. Review the Product Advisories on page 14
.
2. Remove power from the system. See Remove Power from the System on
page 15
.
3. Open the control bay or input bay enclosure door.
IMPORTANT Verify that the ‘X’ on the filter media is on the side that faces away from the
roof vent.