Roland RD-700GX User Manual

103
Using the RD-700GX As a Master Keyboard
Here you can adjust the pitch of the tone.
1 cent = 1/100 semitone
This sets the amount of pitch change that will occur when you
move the Pitch Bend lever (4 octaves).
This sets the depth of the effect when the Modulation lever is
tilted.
These settings determine whether the external MIDI device is
controlled (ON), or not (OFF) by the pedals connected to each
PEDAL jack, the slider, the Modulation lever, the Pitch Bend
lever, and [S1] [S2] buttons.
You can assign and transmit two different control change
messages.
Changing the Pitch
(Coarse Tune/Fine Tune)
Parameter
RPN Description Value
C.T
(Coarse Tune)
00H/
02H
Sets the sound’s
pitch in
semitone units.
- - - (OFF),
-48– +48
(+/- 4
octaves)
F.T
(Fine Tune)
00H/
01H
Sets the sound’s
pitch in units of
one cent.
- - - (OFF),
-50– +50
(+/- 50 cents),
Setting the Range for the Change in
Pitch with the Pitch Bend Lever
(Bend Range)
Parameter
RPN Value
B.R (Bend Range)
00H/00H
- - - (OFF), 0–48
(semitone)
Setting the Amount of Modulation
Applied (Modulation Depth)
Parameter
RPN Value
M.D (Modulation Depth)
00H/05H
- - - (OFF), 0–127
Turning Each Controller On and Off
Parameter
Description Value
Dp
Damper pedal
ON, OFF
F1 Pedal connected to the FC1 jack
F2 Pedal connected to the FC2 jack
PB Pitch Bend Lever
Md Modulation Lever
LW2 CONTROL Slider (LW2)
LW1 CONTROL Slider (LW1)
UP2 CONTROL Slider (UP2)
UP1 CONTROL Slider (UP1)
S1 S1 Button
S2 S2 Button
Transmitting the Control Change
(USER CC)
Parameter
Value
CC1 (User CC1 Number)
- - - (OFF), 0–127
Value (User CC1 Value)
CC2 (User CC2 Number)
Value (User CC2 Value)
RD-700GX_e.book 103 ページ ２００８年２月１３日 水曜日 午後５時４９分

Roland RD-700GX Specifications

General

Brand	Roland
Model	RD-700GX
Category	Musical Instrument
Language	English