121
Detailed Settings for Each Function ([EDIT] Button)
5.
Press
the Cursor [ ] [ ] buttons
to move the
cursor to the positions where the characters
are to be input.
6.
Use the [DEC] [INC] buttons or the VALUE dial
to enter the name.
Names can consist of up to 16 characters.
The following characters are available.
space ! # $ % & ' ( ) + , - . 0–9 ; = @ A–Z [ ] ^ _ ` a–z {
} ~
When the [F2] button is pressed, a single-character
blank space is inserted; pressing the [F1] button deletes
one character.
You can’t save a setup file with a name that starts
with a “. (period)”. Do not use a “. (period)” at the
beginning of the name.
7.
Repeat steps 5–6 to input the name.
8.
When you’ve finished entering the file name,
press the [ENTER] button.
The Setup file will be saved.
“Executing...” appears in the display while the save
is in progress. Be sure never to turn off the power.
If a file with the same name has already been
saved, the confirmation message “Overwrite OK?”
appears. To overwrite the Setup file, press the
[ENTER] button; to save the file under a different
name, press the [EXIT/SHIFT] button.
9.
Press the [EDIT] button, extinguishing its
indicator.
You are returned to the Tone screen.
Here’s how to load a previously saved Setup file.
The current settings are erased when a Setup file is
called up. Be sure to save you would like to keep
first before calling up (p. 120).
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2.
Press the Cursor [ ] [ ] buttons to select
“5.File,” then press the [ENTER] button.
The Edit screen appears.
3.
Press the Cursor [ ] [ ] buttons to select
“1. Load SETUP File,” then press the [ENTER]
button.
The following screen appears.
fig.05-16-2g
4.
Press the [F1 (MEDIA)] button to select the
memory into which you want to load the data.
Value
Description
INT
The data will be stored in the RD-700GX’s
internal memory.
USB
The data will be stored on USB memory
connected to the USB MEMORY connector on
the rear panel.
NOTE
Calling Up Setup Files
(Load SETUP File)
NOTE
RD-700GX_e.book 121 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
