57
Using the Convenient Functions in Performances
You can select the way a Rhythm is played (the pattern) to match a variety of different
musical genres.
1.
Press the Cursor [ ] button to go to the Rhythm/Arpeggio screen.
fig.02-06g
2.
Press the [RHYTHM] button to make the button indicator light.
The Rhythm begins playing.
3.
Press the Cursor [ ] [ ] buttons to move the cursor to “RHY.”
4.
Use the [DEC] [INC] buttons or VALUE dial to select the pattern.
The Rhythm’s pattern changes.
5.
If you press the [RHYTHM] button once more, the indicator light goes out, and the
Rhythm stops playing.
For more information about the kind of Rhythm Patterns, please refer to “Rhythm
Pattern List” (p. 196).
When the Tone screen is displayed, the Rhythm/Arpeggio screen appears when the
Cursor [ ] button is pressed. Pressing the Cursor [ ] button when the Rhythm/
Arpeggio screen is showing then displays the Tone screen.
Changing the Rhythm Pattern without Sounding the Rhythm
1.
Press the Cursor [ ] button to go to the Rhythm/Arpeggio screen.
fig.02-06g
2.
Press the Cursor [ ] [ ] buttons or VALUE dial to move the cursor to “RHY.”
3.
Use the [DEC] [INC] buttons or VALUE dial to select the pattern.
You can also play the selected Rhythm by pressing the [F2 (PLAY)] button.
Changing the Rhythm Pattern
RD-700GX_e.book 57 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
