116
Detailed Settings for Each Function ([EDIT] Button)
This setting determines the function of the [S1] and [S2]
buttons.
Normally, MULTI-EFECTS 1 [CONTROL] knob and MULTI-
EFECTS 2 [CONTROL] knob are used for making settings that
adjust the multi-effects (MFX1/2 CTRL), but they can also be
used for settings that change the way tones are played or the
tempo.
Here you can assign the function that the ZONE LEVEL sliders
will perform when the CONTROL indicator is lit.
→
“Changing the ZONE LEVEL Slider Feet Assignments
(Harmonic Bar)” (p. 64)
Assigning Functions to the [S1] [S2]
Buttons (S1/S2 Assign)
Parameter
Value
Function/
Parameter Setting Changed
S1/S2
00: OFF No control
01:
COUPLE +1OCT
Playing a key will also sound
an additional note one
octave higher.
02:
COUPLE -1OCT
Playing a key will also sound
an additional note one
octave lower.
03:
COUPLE +2OCT
Playing a key will also sound
an additional note two
octave higher.
04:
COUPLE -2OCT
Playing a key will also sound
an additional note two
octave lower.
05:
COUPLE +5TH
Playing a key will also sound
an additional note a fifth (7
semitones) higher.
06:
COUPLE -4TH
Playing a key will also sound
an additional note a fourth
(5 semitones) lower.
07:
OCTAVE UP
Each time you press the
button, the keyboard range
will rise by an octave
(maximum 4 octaves).
08:
OCTAVE
DOWN
Each time you press the
button, the keyboard range
will lower by an octave
(maximum 4 octaves).
09:
START/STOP
The external sequencer will
start/stop.
10:
TAP TEMPO
The tempo will be modified
to the interval at which you
press the button.
11:
SNG PLY/STP
Starts and stops the song (p.
58).
Changing the MULTI-EFFECT 1
[CONTROL] Knob/MULTI-EFFECT 2
[CONTROL] Knob Settings
(Control 1/2 Knob Assign)
Parameter
Value Description
Ctrl 1 Knob
(Control 1
Knob Assign)
00: OFF
No control
MFX 1
CTRL
Adjusts the depth of multi-effect
1 for the current zone.
TEMPO Adjusts the tempo.
Ctrl 2 Knob
(Control 2
Knob Assign)
OFF
No control
MFX 2
CTRL
Adjusts the depth of multi-effect
2 for the current zone.
TEMPO Adjusts the tempo.
Assigning Functions to the ZONE
LEVEL Sliders (Slider Assign)
Parameter
Value Description
UP1/UP2/
LW1/LW2
(Slider
Assign)
00: OFF
No control
CC01–CC31,
CC33–CC95
Controller Numbers 1-31,
33-95
96:
BEND UP
Raises the pitch in
semitone units.
97:
BEND DOWN
Lowers the pitch in
semitone units.
98:
AFTERTOUCH
Controls After Touch
Changing the Harmonic Bar Settings
(Harmonic Bar)
RD-700GX_e.book 116 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
