122
Detailed Settings for Each Function ([EDIT] Button)
5.
When loading System parameter settings,
press the [F2 (System)] button to check in the
check box.
System Parameter is following settings.
• System settings (p. 106)
• V-LINK Settings (p. 133)
• Favorite Setup Settings (p. 66)
• ONE TOUCH [PIANO] button and the ONE
TOUCH [E. PIANO] button Settings (p. 77)
• Pedal settings when Pedal Mode is set to
“SYSTEM” (p. 107)
• Sound control settings when Sound Control
Mode is set to “SYSTEM” (p. 108)
The system parameter is memorized by only the
Setup file saved after pressing the [F1 (WRITE)]
button to memorize a Setup to RD-700GX.
6.
Use the Cursor [ ] [ ] buttons or the VALUE
dial to select the file you want to call up, then
press the [ENTER] button.
The confirmation message appears.
fig.05-16-3g
If you do not want to load the Setup file, press the [EXIT/
SHIFT] button.
7.
Press the [ENTER] button once again to load
the Setup file.
The Setup file is loaded into the RD-700GX.
Be sure never to turn off the power while the load
is in progress.
If you load a file with a name that contains
characters that cannot be displayed by the RD-
700GX, the file name is displayed as “?.”
8.
Press the [EDIT] button, extinguishing its
indicator.
You are returned to the Tone screen.
Here’s how to delete a previously saved Setup file.
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2.
Press the Cursor [ ] [ ] buttons to select
“5.File,” then press the [ENTER] button.
The Edit screen appears.
3.
Press the Cursor [ ] [ ] buttons to select
“2. Delete SETUP File,” then press the [ENTER]
button.
The following screen appears.
fig.05-19g
4.
Press the [F1 (MEDIA)] button to select the
memory containing the Setup file you want to
delete.
5.
Use the Cursor [ ] [ ] buttons or the VALUE
dial to select the Setup file that you want to
delete, and press the [ENTER] button.
NOTE
Deleting a Setup File
(Delete SETUP File)
RD-700GX_e.book 122 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
