74
Using the Convenient Functions in Performances
Here’s how you can edit the audio file settings, such as changing the audio file played
by each key, or specifying whether the file will be played repeatedly.
1.
As described in “Selecting the Audio File Set” (on the preceding page), load the audio
file set that you want to edit.
The audio file set will be loaded into the RD-700GX, and a screen like the following will appear.
2.
Press the [F2 (EDIT)] button.
The following screen appears.
Now you can change the audio file that is assigned to each key, and specify how it is to be played
(the playback mode).
3.
Press the key whose settings you want to change.
The audio file assigned to each key and its playback mode are shown.
4.
Use the [DEC] [INC] buttons or VALUE dial to select the audio file that will be played by
the specified key.
If you press the [DEC] [INC] buttons simultaneously, the audio file assigned to that key
will be cleared. No playback mode indication is shown on the graphic for keys to
which no audio file is assigned, and the audio file name field will indicate “No
Assign.”
5.
Press the [F2 (MODE)] button to select play mode.
The playback mode will change each time you press the [F2 (MODE)] button.
Changing the Audio File Settings
RD-700GX_e.book 74 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
