138
Connecting External MIDI Devices
Now, try using an external sequencer to record your music
onto multiple tracks, and then play back the recorded
performance.
921
To prevent malfunction and/or damage to
speakers or other devices, always turn down the
volume, and turn off the power on all devices
before making any connections.
fig.06-01e
1.
Before starting the connection procedure, make
sure that the power to all devices has been turned
off.
2.
After reading “Connecting the External Equipment
to RD-700GX” (p. 23), connect an audio device/
system or headphones.
3.
Connect the external MIDI sound device with the
MIDI cable as shown in the figure above.
4.
As described in “Turning On the Power” (p. 25),
turn on the power of each device.
“Rec Mode” is a convenient feature to use when recording to
an external sequencer.
When using the Rec Mode function, you can get the most
suitable settings for recording the RD-700GX’s data to an
external sequencer, without having to make all the Part and
channel settings.
1.
Press the [EDIT] button, getting the indicator to light.
The Edit Menu screen appears.
fig.06-02g
2.
Press the Cursor [ ] button to select “9.Utility.”
3.
Press the [ENTER] button to display the Edit screen.
fig.06-03g
4.
Press the Cursor [ ] [ ] buttons to select “1.
Rec Setting.”
5.
Press the [ENTER] button, and the following screen
will appear:
fig.06-04g
Recording RD-700GX
Performances to an External
MIDI Sequencer
Connecting to an External Sequencer
NOTE
MIDI IN MIDI OUT
MIDI IN MIDI OUT
MIDI Sequencer
RD-700GX
Settings for Recording (Rec Setting)
Parameter
Value Description
Rec Mode
ON, OFF
Ordinarily this will be set to OFF.
When this is set to ON, settings
appropriate for recording are used
with respect to the output from MIDI
OUT, regardless of the INTERNAL
zone settings.
Local
Switch
This switches the Local Switch on and
off. Although normally set to ON, it
should be set to OFF when
recording. For details, refer to the
following section “About the Local
Switch” (p. 139).
RD-700GX_e.book 138 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
