EasyManuals Logo
Home>Roland>Musical Instrument>RD-700GX

Roland RD-700GX User Manual

Roland RD-700GX
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
142
Connecting to Your Computer
The USB driver to be used when a computer is connected to
the USB connector is determined as follows:
1.
Press the [EDIT] button.
2.
Press the Cursor [ ] [ ] buttons to select “0.
SYSTEM,” and then press the [ENTER] button.
3.
Press the Cursor [ ] [ ] buttons to switch
screens, and press the Cursor [ ] [ ] buttons
to move the cursor to “USB Driver.”
4.
Use the [DEC] [INC] buttons or the VALUE dial to
select the USB driver you want to use.
5.
Press the [F1 (WRITE)] button.
6.
Turn the power off, then on again.
In some cases, when USB memory is connected to the USB
MEMORY connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the USB
memory setting.
1.
Press the [EDIT] button.
2.
Press the Cursor [ ] [ ] buttons to select “0.
SYSTEM,” and then press the [ENTER] button.
3.
Press the Cursor [ ] [ ] buttons to switch
screens, and press the Cursor [ ] [ ] buttons
to move the cursor to “USB Memory Mode.”
4.
Use the [DEC] [INC] buttons or the VALUE dial to
edit the value.
5.
Press the [F1 (WRITE)] button.
6.
Turn the power off, then on again.
If the RD-700GX is connected to your computer, performance
data from a MIDI device connected to the RD-700GX’s MIDI
IN connector can be sent to your computer.
Switching USB Drivers
Parameter
Value Description
USB Driver
ORIGINAL
Select this if you’re using the
USB driver on the included CD-
ROM (Audio Key Utility 2), or
a USB driver you downloaded
from the Roland website.
GENERIC
Choose this if you want to use
the standard USB driver that
was included with your
computer.
Changing the USB Memory Setting
Parameter
Value
USB Memory
Mode
Mode1, Mode2
Using the RD-700GX as a USB MIDI
Interface (USB MIDI Thru Sw)
Parameter Value Description
USB MIDI
Thru Sw
OFF
Performance data from the
device connected to the RD-
700GX’s MIDI IN connector
will not be sent to your
computer.
ON
Performance data from the
device connected to the RD-
700GX’s MIDI IN connector
will be sent to your computer.
RD-700GX_e.book 142 ページ 2008年2月13日 水曜日 午後5時49分

Table of Contents

Other manuals for Roland RD-700GX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland RD-700GX and is the answer not in the manual?

Roland RD-700GX Specifications

General IconGeneral
BrandRoland
ModelRD-700GX
CategoryMusical Instrument
LanguageEnglish

Related product manuals