107
Detailed Settings for Each Function ([EDIT] Button)
You can store different Sound Control settings (p. 50) for each
individual Setup (p. 65).
This setting determines whether or not the Setup Sound Control
settings values are to be changed when Setups are switched.
Pedal settings (p. 115) can be stored for each Setup (p. 65).
This setting determines whether or not the pedal settings are
switched to the values stored in the Setup you are switching to.
Assigning the Pedal Function When Pedal
Mode is Set to “SYSTEM”
When this is set to SYSTEM, “Pedal Setting” appears in the
lower right of the screen. Pressing the [F2] button at this point
calls up the screen for the function assigned to the pedal.
Preventing Sound Control Settings
from Being Switched
(Sound Control Mode)
Parameter
Value Description
SoundCtrl
Mode
(Sound
Control
Mode)
SETUP
Sound Control settings change
when Setups are switched.
SYSTEM
Sound Control settings do not
change when Setups are
switched.
Preventing Pedal Settings from Being
Switched (Pedal Mode)
Parameter
Value Description
Pedal
Mode
SETUP
Pedal settings change when
Setups are switched.
SYSTEM
Pedal settings do not change
when Setups are switched.
Parameter Value
Function/Parameter Setting
Changed
FC1
FC2
00: OFF
No control
CC01–CC31,
CC33–CC95
Controller Numbers 1–31,
33–95
96:
BEND UP
The pitch will rise in the
same way as when you
move the Pitch Bend lever
toward the right.
97:
BEND DOWN
The pitch will fall in the same
way as when you move the
Pitch Bend lever toward the
left.
98:
AFTERTOUCH
Controls aftertouch.
99:
OCTAVE UP
Each pedal press raises the
key range in octave steps (up
to 4 octaves higher).
100:
OCTAVE
DOWN
Each pedal press lowers the
key range in octave steps (up
to 4 octaves lower).
101:
START/STOP
The external sequencer will
start/stop.
RD-700GX_e.book 107 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
