58
Using the Convenient Functions in Performances
Here’s how to play back SMF music files, audio data, or songs from a CD.
You can play songs that are saved on USB memory (sold separately). For details,
refer to “Using the USB Memory” (p. 27).
If you want to connect a commercially available CD drive and play a song from CD,
refer to the owner’s manual of your CD drive.
CD drive models that have been verified to operate correctly with the RD-700GX are
listed on the Roland website (www.roland.com).
fig.02-08p
1.
Press the [SONG] button.
The SONG screen appears.
2.
Press the [F2 (PLAY)] button.
The song data begins playing. The [SONG] button’s indicator is lit.
3.
Press the [F2 (STOP)] button once more; the indicator goes out, and the song stops playing.
Song playback will stop if you press the [SONG] button while the song is playing.
If you press the [RHYTHM] button while the song is playing, song playback will stop
and the Rhythm will begin sounding. If you press the [AUDIO KEY] button while the
song is playing, song playback will stop and the Audio Key screen will appear.
You can make the following settings related to song playback.
• Change the way in which songs play (play a single song, play all songs)
• Transpose the song playback
• Minimize sounds located in the center, such as the melody
For details, refer to “Changing Settings Related to Song Playback (Song Function)” (p.
135).
Playing the Songs ([SONG] Button)
Suppose that while the song was playing, you switched from the Song screen to a
different screen. In this state, pressing the [SONG] button in order to move back to the
Song screen will also stop the song.
In such cases, you can press and continue holding the [SONG] button for about one
second to access the Song screen without stopping the song.
RD-700GX_e.book 58 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
