Roland RD-700GX User Manual

119
Detailed Settings for Each Function ([EDIT] Button)
This is a stereo compressor (limiter) that is applied to the final
output.
With separate settings for the high-frequency range,
midrange, and low-frequency range, this reduces
inconsistencies in volume levels by compressing the sound
when the volume exceeds a preset volume level.
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
fig.05-02g
2.
Press the Cursor [ ] [ ] buttons to select
“4.Sound Control.”
3.
Press the [ENTER] button to display the Edit
screen.
fig.05-11g
The screen will not indicate “WRITE” if you’ve
selected “SETUP” as the Sound Control Mode
setting for System in edit mode.
4.
Press the Cursor [ ] button to select “Type.”
5.
Use the [DEC] [INC] buttons or the VALUE dial
to set the type of compressor.
6.
Press the Cursor [ ] [ ] buttons to switch
screens, and press the Cursor [ ] [ ] buttons
to move the cursor to the parameter to be set.
With certain parameters, pressing the [F2 (L → M → H)]
button selects the low-frequency range, midrange, or
high-frequency range.
7.
Use the [DEC] [INC] buttons or the VALUE dial
to set the value.
If saving settings in System
8.
Press the [F1 (WRITE)] button.
The confirmation message appears.
9.
Press the [ENTER] button.
The settings are written to Sound Control Type “USER.”
If saving settings in Setup
8.
Press the [SETUP WRITE] button.
Save the settings in a Setup as described on p. 67.
9.
When you have finished making the settings,
press the [EDIT] button, extinguishing its
indicator.
You are returned to the Tone screen.
Settings saved in the RD-700GX are not deleted
even when the power is turned off.
When you change the this parameter, the Sound Control
parameters will be automatically adjusted to the optimal
values. You can make the settings easily by first setting the
Sound Control Type and then changing only the necessary
parameters.
Making the Sound Control
Settings (Sound Control)
How to Make Settings
NOTE
Selecting the Type of Compressor
(Sound Control Type)
Parameter Value Description
Type
(Sound Control
Type)
HARD COMP
Applies strong
compression.
SOFT COMP Applies mild compression.
LOW BOOST Boosts the low end.
MID BOOST Boosts the midrange.
HI BOOST Boosts the high end.
USER
The saved settings are
written.
RD-700GX_e.book 119 ページ ２００８年２月１３日 水曜日 午後５時４９分

Roland RD-700GX Specifications

General

Brand	Roland
Model	RD-700GX
Category	Musical Instrument
Language	English