79
Making Detailed Settings for the ONE TOUCH Tones
This adjusts the sound of the hammer striking the string of an
acoustic piano.
Changes the pitch using the “stretch tune” method typically
used on acoustic pianos. This makes high-range sounds
slightly higher in pitch, and low-range sounds slightly lower in
pitch.
This lets you change the way that the sound will respond when
you play the keyboard strongly.
This lets you change the way that the sound will respond when
you play the keyboard softly. For example, this can be
adjusted suitably for solo performance, or to prevent your
sound from being buried in the rest of the band.
The tonal change will still be great even if you
change this value.
You can make advanced settings for the touch used for the keys.
This setting is switched automatically according to
the value of Key Touch Offset, which follows.
Changing this setting also changes the Key Touch
setting in Edit Mode (p. 113).
This setting provides even more precise adjustment of the key
touch than available with the Key Touch setting alone.
This allows you to achieve a more precise setting for the Key
Touch by specifying an intermediate value between Key Touch
settings.
When this settings value continues into the positive
or negative direction, the Key Touch’s five-step
value is switched automatically in accordance with
Adjusting the Sound of the Hammer
Strike (Hammer Noise)
Parameter
Value Description
Hammer
Noise
-2–0–+2
Higher values will increase
the sound of the hammer
striking the string.
Precise Modification of Chord
Sonorities (Stretch Tune)
Parameter
Value Description
Stretch
Tune
OFF
Stretched tuning will not be used.
DEFAULT This is the standard tuning curve.
Changing the Sound’s Response to
Strong Playing (Dynamics)
Parameter
Value Description
Dynamics
Type
OFF, TYPE 1,
TYPE 2, TYPE 3
Selects the type of effect.
Level
1–127
Adjusts the strength of the
effect.
Changing the Sound’s Response to
Soft Playing (Sound Lift)
Parameter
Value Description
Sound Lift
0–127
Increasing this value will allow fairly
loud sounds to be produced even
when you play with a light touch, so
that your performance will not be
obscured by the playing of your band.
Changing the Key Touch (Key Touch)
Parameter
Value Description
Key Touch
SPR
LIGHT
An even lighter setting than LIGHT.
LIGHT
This sets the keyboard to a light
touch. You can achieve fortissimo (ff)
play with a less forceful touch than
usual, so the keyboard feels lighter.
This setting makes it easy to play,
even for children.
MEDIUM
This sets the keyboard to the
standard touch. You can play with
the most natural touch. This is the
closest to the touch of an acoustic
piano.
HEAVY
This sets the keyboard to a heavy
touch. You have to finger the
keyboard more forcefully than usual
in order to play fortissimo (ff), so the
keyboard touch feels heavier.
Dynamic fingering adds even more
feeling to what you play.
SPR
HEAVY
An even heavier setting than
HEAVY.
Making Fine Adjustments to the
Keyboard Touch (Key Touch Offset)
Parameter
Value Description
Key Touch
Offset
-10–+9
The touch sensitivity becomes
heavier as the value increases.
NOTE
NOTE
NOTE
NOTE
RD-700GX_e.book 79 ページ ２００８年２月１３日 水曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
