FI SYSTEM 4-53
FUEL PUMP AND FUEL MESH FILTER
INSTALLATION
Install the fuel pump and fuel mesh filter in the reverse order of
removal, and pay attention to the following points:
• Install the new O-rings to the fuel pressure regulator and fuel
pipe.
• Apply thin coat of the engine oil to the O-rings.
Use the new O-rings to prevent fuel leakage.
• Tighten the nut together with the lead wire terminal.
• Tighten the screws together with the lead wire terminals.
• Install the new O-ring and apply grease to it.
#
The O-ring must be replaced with a new one to prevent
fuel leakage.
X 99000-25010: SUZUKI SUPER GREASE “A”
To Next Page
Loading...
Need help?
General
