ENGINE 3-41
OIL PRESSURE REGULATOR
• Inspect the operation of the oil pressure regulator by pushing
on the piston with a proper bar.
• If the piston does not operate, replace the oil pressure regula-
tor with a new one.
OIL STRAINER
• Inspect the oil strainer body for damage.
• Clean the oil strainer if necessary.
CRANK BALANCER
DISASSEMBLY
• Disassemble the crank balancer assembly.
1 Crank balancer 4 Washer
2 Balancer gear damper 5 Bearing
3 Balancer gear 6 Spacer
INSPECTION
• Inspect the balancer shaft for wear or damage.
• Inspect the bearing, the damper and the gear for wear or dam-
age.
• If there is anything usual, replace them with new ones.
REASSEMBLY
• Apply engine oil to each parts.
• Assemble the crank balancer as follow;
• Install the convex parts on crank balancer between dampers.
• Align the engraved line A on the crank balancer with the
punched mark B on the balancer gear.
To Next Page
Loading...
Need help?
General
