3.4 Removing and installing battery for fold‐
ing key with remote control
3.4.1 Removing
Carry out following work:
– Insert screwdriver in slot between transmitter unit -1- and key
-2-.
– Turn screwdriver in direction of -arrow- to separate transmitter
unit from key.
– Press transmitter unit -1- apart using profile section of key
-2-.
– Unclip battery -1- from the retainers -2- with a screwdriver in
direction of -arrow-.
3.4.2 Installing
Note
♦
Before installing battery, always press one of the buttons once.
♦
Thus transmitter unit is reset and can recognize a new battery
only now.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
118 Rep. gr.57 - Front doors, door components, central locking